Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
Two-way three-phase meter, MID calibrated
Yra sandėlyje: Ne
Pardavėjo atsargos: Ne
Minimalus užsakymo kiekis: 1
Kaina (be PVM):
172,73 €
EAN: 4010312501870
MPN: 28480315
Pakuotė: 1
Technical Information
| Prekės būklė | Nauja |
| Gamintojo pavadinimas | Two-way three-phase meter, MID calibrated |
| Prekės ženklas | ELTAKO |
| Kategorijos |
Elektros skaitikliai
|
| Kilmės šalis | CN |
| Suderintos sistemos kodas | 9028 3019 00 |
| Montavimo metodas | DRA |
| Plotis | 70 mm |
| Aukštis | 82 mm |
| Gylis | 58 mm |
| Dažnio diapazonas | 50 Hz |
| Maks. srovė (Imax) | 80 A |
| Modulinių tarpų skaičius plotyje | 4 |
| Saugos laipsnis (IP) | IP20 |
| Impulsų dažnis | 1000 Imp/kWh (kvarh) |
| Poliškumas | Keturgyslis laidas |
| Nominali įtampa (Un) N-L | 230 V |
| Nominali srovė (In) | 10 A |
Pakavimo informacija
| Pakavimo lygis 1 | 4010312501870, 4010312501870 |
| Pakavimo lygis 2 | 4010312501870 |
Kiti techniniai duomenys
| Modelis | Tiesioginis matavimas |
| Tinka | Pirkti |
| Rodmens tipas | Skaitmeninis |
| Bendras skaičius (skaitiklis) | 7 |
| Matuoklio tipas | Elektroninis |
| Sąsajos tipas | Kita |
| Kilovatvalandžių skaitiklio energijos tipo versija | Efektinė galia |
| Kilovatvalandžių skaitiklio tarifinis modelis | Du tarifai |
| Tarifo kontrolė | Išorinis |
| Išleidimo mechanizmas | - |
| Kalibruotas | Yes |
| Patvirtinimas | Matavimo priemonių direktyva |
| Impulsinė išvestis | Optika |
| Impulsų tipas | S0 |
| Tikslumo klasė | B |
| Apkrovos profilio matavimas | - |
| EEC40 parašas | - |
| Su blokavimo kodu | - |
| Nominali įtampa (Un) L-L | 400 V |
Atsisiuntimai
Aprašymas
Two-way three-phase meter. Maximum current 3x80A. Standby loss 0.5 watt per path only. Modulair device for DIN-EN 60715 TH35 rail mounting. 4 modules = 70mm wide and 58mm deep. Accuracy class B (1%). With S0 interface as standard. It measures active energy by means of the current between input and output. The internal power consumption of 0.5 watt active power per path is neither metered nor indicated. The active energy is added depending on the sign. Positive power in the meter means energy consumption, negative power means energy delivery. The energy measurement is balanced. If the energy consumption (P positive) is greater than the energy supply (P negative), the meter reading T arrow right is increased. If the energy supply is greater than the energy consumption, the meter reading T arrow left is increased. Energy consumption is shown with a right arrow and energy supply is shown with a left arrow above the active bar in the display. 1, 2 or 3 phase conductors with max. currents up to 80A can be connected. The inrush current is 40mA. The N terminal must always be connected. Energy consumption and energy supply values are stored in non-volatile memory and are displayed again immediately after a power failure. The 7 segment LC display is also legible twice within a period of 2 weeks without power supply. Power consumption is shown by a bar flashing at a rate of 100 times per kWh. On the right next to the display are the keys MODE and SELECT. Press them to scroll through the menu. First the background lighting switches on. Then the total active energy per consumption and delivery, the active energy of the resettable memory consumption and delivery as well as the instantaneous power, voltage and current values for each phase conductor can be displayed. Error message: If a phase connection is missing, the corresponding phase is shown on the display.