DALI LED RGB dimmer 16A for ceiling installation (DT8)
In stock price (excl. VAT):
163,39 €
This price is valid until 2024-12-31
Price per m:
163,39 €
EAN: 4010312321508
MPN: 33000014
Our warehouse:
No
Vendor stock:
No
Per package:
1
Per box:
1
Per pallet:
N/A
Technical data
| Item condition | New |
| Manufacture name | DALI LED RGB dimmer 16A for ceiling installation (DT8) |
| Brand | ELTAKO |
| Categories |
Switches |
| Country of origin | BG |
| Harmonized System Code | 8542 3190 00 |
| Assembly arrangement | Basic element |
| Method of operation | Push button |
| Nominal voltage | 12-48 V |
| Suitable for degree of protection (IP) | IP20 |
| Device width | 30 mm |
| Device height | 120 mm |
| Device depth | 22 mm |
| Max. switching power LED | 768 W |
Packing details
| Packing level 1 | 4010312321508, 4010312321508 |
Downloads
Other Technical data
| Mounting method | Other |
| Colour | Grey |
| Halogen free | Yes |
| Connection type | Push-in clamp |
| Surface protection | Untreated |
| Material quality | Thermoplastic |
| Material | Plastic |
| Type of fastening | Other |
| Light value memory | Yes |
| Substation input | No |
| Serial dimmer | No |
| Applicable with movement sensor | No |
| Applicable with transmission button | No |
| Applicable with infrared button | No |
| Applicable with presence indicator | No |
| Applicable with button | Yes |
| Applicable with time switch/timer | No |
| Control voltage | 9.5-22.5 V |
| Transparent | No |
| Surface finishing | Matt |
| Core cross section | 1.5-2.5 mm² |
| IFTTT support available | No |
| Dimming phase cut-off | No |
| Dimming phase cut-on | No |
| Min. depth of built-in installation box | 22 mm |
| App control via Bluetooth | No |
| Nominal power resistive load | 768 W |
| Compatible with Apple HomeKit | No |
| Compatible with Google Assistant | No |
| Compatible with Amazon Alexa | No |
Description
DALI LED dimmer with RGB colour control for ceiling installation. 120x30x22mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, operating mode DT8: a DALI address to control brightness and colour DALI DT8, Type RGBWAF). Operating mode Colour&Dim: activated by 2 DALI addresses, one to adjust brightness and one to set the colour. SwitchDim2: Operation via 2 switch inputs permit brightness and colour to be controlled without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Power voltage 12V to 48V DC (depending on operating voltage of LED modules). Connected current 16A. The maximum connected current can be distributed to the channels as required. Low stand-by losses. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The device has several operating modes: DT8 (as-delivered state): In this operating mode brightness and colour are controlled by a DALI address (Device Type 8). Alternatively, operation can also take place by two pushbutton inputs (SwitchDim2): SwD1: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Colour. Colour&Dim: This operating mode is used to control RGB luminaries. Control is by means of 2 DALI addresses. One address affects brightness and the other affects channel distribution (e.g.: colour). Colour&Dim mode is used to adjust colour temperature without affecting brightness and vice versa. Adjustment is by means of DALI standard commands such as Dim Up/Down. This permits all customary controls and gateways (e.g. KNX). This control option is an alternative to DT8-RGBWAF mode. Operable via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: Colour.