LED dimmer switch, Power MOSFET up to 4A

Item condition	New
Manufacture name	LED dimmer switch, Power MOSFET up to 4A
Brand	ELTAKO
Categories	Switches
Country of origin	CN
Harmonized System Code	8536 5080 00
Assembly arrangement	Other
Method of operation	Touch control button
Type of load	Other
Nominal voltage	8-230 V
Device width	45 mm
Device height	45 mm
Device depth	18 mm

Packing level 1	4010312109502, 4010312109502
Packing level 2	4010312109502
Packing level 3	4010312109502

Mounting method	Flush mounted (plaster)
Colour	Blue
Halogen free	Yes
Connection type	Screwed terminal
Surface protection	Other
Material quality	Thermoplastic
Material	Plastic
Type of fastening	Mounting with screw
Light value memory	Yes
Substation input	No
Serial dimmer	No
Applicable with movement sensor	No
Applicable with transmission button	No
Applicable with infrared button	No
Applicable with presence indicator	No
Applicable with button	Yes
Applicable with time switch/timer	No
Control voltage	8-230 V
Transparent	No
Surface finishing	Matt
Core cross section	4 mm²
IFTTT support available	No
Dimming phase cut-off	No
Dimming phase cut-on	No
Min. depth of built-in installation box	18 mm
App control via Bluetooth	No
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

Power MOSFET for LED lamps 12-36V DC up to 4A, pulse width modulation PWM. Stand-by loss 0.1 Watt only. With adjustable minimum brightness and dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Dimmer switch for R- and LED loads up to 4A depending on ventilation conditions. Zero passage switching with soft start and soft OFF to protect lamps. Supply voltage input 12 to 36V DC, depending on the connected LED illumination. A pulse resistant switching power supply unit is necessary. Universal control voltage 8..230V UC, electrically isolated from the supply voltage. Either direction pushbuttons can be connected to arrow up/arrow down or these terminals will be bridged and a pushbutton will be connected as an universal pushbutton. With universal pushbutton: short commands switch on/off, permanent control changes the brightness to the maximum. An interruption of the control changes the dimming direction. With direction pushbutton: switching and dimming on with arrow up, turning and dimming off with arrow down. A dual pulse with arrow up effects dimming on up to the maximum brightness with the set dimming speed (dimspeed). The set brightness level will be stored when turning off (Memory). In case of power failure the switching position and the brightness level will be stored and will be switched on when supply voltage recurs. Automatic electronic overload protection and overtemperature switch off. The LED indicates an activation by a short flickering. With the top rotary switch %lamp the minimum brightness level (completely dimmed down) can be adjusted. With the lower dim speed rotary switch, the dimming speed can be set. At the same time, soft-on and soft-off is changed. With switching operation for children's rooms (universal or direction pushbutton arrow up): if the light is switched on by holding down the pushbutton it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is pressed without modifying the latest stored brightness level. Snooze function (universal or direction pushbutton arrow down): with a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function.