Wireless pull switch in E-Design65, pure white glossy

Item condition	New
Manufacture name	Wireless pull switch in E-Design65, pure white glossy
Brand	ELTAKO
Categories	Switches
Country of origin	CN
Harmonized System Code	8526 9200 00
Mounting method	Surface mounted (plaster)
Colour	White
Halogen free	Yes
Surface protection	Other
Signal transmission	Radio frequency (RF)
Number of channels	1
Range	30 m
With remote control	No
Wall-mounted transmitter	Yes
Suitable for switch	Yes
Suitable for dimmer	No
Suitable for movement sensor	No
Material quality	Thermoplastic
Material	Plastic
With manual transmitter	No
Suitable for venetian shutter switch	No
RAL-number (similar)	9016
Transparent	No
Surface finishing	Matt
Window transmitter	No
Suitable for indication element	Yes
IFTTT support available	No
Compatible with Apple HomeKit	No
Compatible with Google Assistant	No
Compatible with Amazon Alexa	No

Packing level 1	4010312316139, 4010312316139
Packing level 2	4010312316139

Wireless pull switch for surface mounting 84x84x24mm. With silver and red handle. Generates the power for wireless telegrams itself when the button is pressed, therefore there is no connecting wire and no standby loss. When the handle is pulled and released, a wireless telegram is sent to the Eltako ­wireless network. The scope of supply includes the completely assembled pull switch, a silver handle, a red handle and two screws and rawl plugs. Fitting by screwing: First dismantle the fully assembled pull switch. To do this, remove the screw, unhook the cover and remove the intermediate frame together with the rocker and transmitter module by loosening the retaining bars at the top and bottom. Fit the mounting plate by tightening the screws. Engage the frame together with the hook-in cut-outs at the top and the intermediate frame including the transmitter module and rocker with the rear ID 0 upwards. Insert the cover with the inserted cord into the top hook-in cut-outs of the frame and screw tight into the retaining plate using the screw at the bottom. Shorten the cord to the required length, push it through the red or silver handle and secure it by a double knot. Independent of position: The pull switch functions in any position, even when attached to the ceiling. Matching actuators: The wireless pull switch transmits the same wireless telegrams when operated as a wireless pushbutton and can therefore be taught-in in actuators and the GFVS software in the same way. If it will be taught-in in an actuator as central on as an emergency call switch the emergency can only be received with another taught-in switch with central off. The wireless module integrated in the wireless pull switch can be taught-in encrypted as described in the operating instructions in all encryptable actuators of the Series 61, 62 and 71 as well as FAM14. This requires the FTVW wireless pushbutton encryption rocker. Encryptable actuators bear the key pictogram.