PM5350 Power & Energy meter with THD, alarming

In stock price (excl. VAT):

255,60 €

This price is valid until 2024-08-31

Price per m: 255,60 €

EAN: 3606480284311

MPN: METSEPM5350

Our warehouse: No Vendor stock: No

Per package: 1 Per box: 12 Per pallet: N/A

Technical data

Item condition	New
Manufacture name	PM5350 Power & Energy meter with THD, alarming
Brand	Schneider Electric
Categories	Automatics and control
Harmonized System Code	9028 3090 00
Mounting method	Front mounting
Width	102 mm
Model	Measurement transformer
Height	112 mm
Voltage type	AC/DC
Measured value memory	Yes
Indication	Graphic
Frequency measurement	Yes
Max. current (Imax)	8.5 A
Reactive power	Yes
Accuracy class	0.5
Harmonics measurement	Yes
Measuring range	35-690 V
Power factor	Yes
Effective power	Yes
Apparent power	Yes
Step angle (cos phi)	No
Supporting protocol for LON	No
Supporting protocol for Modbus	Yes
Max. value storage	Yes
Min. value storage	Yes
With communication interface RS-485	Yes
Calibrated	No
Pulse output	Optic
Pole type	Three conductor/four conductor
Measurement type load profile	Yes
Nominal current (In)	5 A
With communication interface KNX	No
With communication interface according to EN 62056-21	No
Wth communication interface M-Bus	No

Packing details

Packing level 1	3606480284311
Packing level 2	3606480284319

Downloads

ECOP (Environmental Code of Practice) Technical manual Instructions for use Declaration DOC CE (Declaration of conformity CE) Mounting instruction Declaration EPD (Environmental Product Declaration)

Description

This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 32 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to 15th Harmonic. Include a non-volatile memory for several parameters and alarms. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 85 to 265 VAC and 100 to 300 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 20V AC to 480V AC, CAT III or 20V AC to 690V AC, CAT II at 45 Hz to 70 Hz. The range of measurement voltage between Phase and Neutral is 20V AC to 277V AC, CAT III or 20V AC to 400V AC, CAT II at 45 Hz to 70 Hz. Communication protocol is Modbus RTU and ASCII 2 wires with RS485 port support. The meter also has four digital inputs and dual relay outputs. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.24 inches (57 millimetres), height 3.78 inches (96 millimetres) and product weight 8.8 onces (250 g).