Svetainės kalba
Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
PT-C12 24 V AC/DC image 1
PT-C12 24 V AC/DC image 2
PT-C12 24 V AC/DC image 3
PT-C12 24 V AC/DC thumbnail 1
PT-C12 24 V AC/DC thumbnail 2
PT-C12 24 V AC/DC thumbnail 3
METZ CONNECT

PT-C12 24 V AC/DC

Yra sandėlyje: Ne Pardavėjo atsargos: Ne Minimalus užsakymo kiekis: 1
Kaina (be PVM):
53,69 €
Ši kaina galioja iki 17.01.25
EAN: 4250184122173
MPN: 110501
Pakuotė: 1
Dėžė: 10

Technical Information

Prekės būklė Nauja
Gamintojo pavadinimas PT-C12 24 V AC/DC
Prekės ženklas METZ CONNECT
Kategorijos Kabelių dangteliai ir jungtys, gnybtai
Kilmės šalis DE
Suderintos sistemos kodas 9030 3320 00
Galvaninė seperacija Pasyvus
Apsauga nuo per didelės srovės Yes
Pirminio šono jungties tipas Kita
Antrinio šono jungties tipas Kita
Dvikryptis No

Pakavimo informacija

Pakavimo lygis 1 4250184122173
Pakavimo lygis 2 4250184122173

Aprašymas

The potential isolator / signal converter is used for isolating analog signals in the range from 0 to 10 V DC, and 0 to 20 mA DC or for a signal conversion from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals as well as the supply voltage are electrically isolated from each other. An input signal from 0 to 10 V or 0 to 20 mA can be connected to the device. Electrical isolation function: With the PT-C12, the input signal 0 to 10 V is adjusted proportionally to the output signal 0 to 10 V. The PTi-C12 adjusts the input signal from 0 to 20 mA proportional to the output signal from 0 to 20 mA. Function Signal conversion with potential separation: With a signal conversion from 0 to 10 V to 0 to 20 mA, or from 0 to 20 mA to 0 to 10 V, the output signal converted thereby can be readjusted using an integrated spindle trimmer. In addition, a manual emergency operating option with a MANUAL AUTO switch with feedback contact is also integrated. The output signal from 0 to 10 V or 0 to 20 mA can be set via the front potentiometer when the switch is in the MANUAL position. A constant output voltage of max. 10 V DC and 5 mA is available at the 10 V terminal. Input Y is used for the LED display of the output voltage Ua. The brightness of the LED depends on the level of the output signal (bridge between Ua and Y). Alternatively, an external signal at the input Y can be connected to the LED display from 0 to 10 V DC.Connection with screw type terminal blocks