Technical Information
Prekės būklė |
Nauja |
Gamintojo pavadinimas |
Recessed luminaires Arimo Fit C Prisms White ETDD 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 7528751 |
Prekės ženklas |
TRILUX
|
Kategorijos |
Sieniniai ir lubiniai šviestuvai
|
Kilmės šalis |
DE |
Korpuso spalva |
Kita |
Spalvos atkūrimo indeksas |
20-39 (4 klasė) |
Lempa |
Kita |
Smūgio stiprumas |
IK00 |
Saugos laipsnis (IP) |
Kita |
Išspinduliavimo kampas (vertė) |
Atviras spindulys/difuzinis |
Pakavimo informacija
Pakavimo lygis 1 |
4018242524518, 4018242524518 |
Pakavimo lygis 2 |
4018242811656 |
Kiti techniniai duomenys
Saugos klasė |
Nėra |
Lempos laikiklis |
Kita |
Jungties tipas |
Kita |
Įtampos tipas |
Kintamoji srovė |
Grotelių tipas |
Kita |
Įrenginio tipas |
Elektrinis transformatorius |
Korpuso medžiaga |
Kita |
Šviesos išvestis |
Direct |
Šviesos dalijimasis |
Asimetriškas |
Gaubto medžiaga |
Kita |
Šviesos spalva |
Kita |
Instaliacijos tipas |
Tinka praeinamajai instaliacijai |
Spalvinis darnumas (pagal McAdamso elipsę) |
SDCM1 |
Foto biologinė sauga pagal EN 62471 |
Kita |
NEMA apsaugos laipsnis |
Kita |
Kaitinimo bandymas pagal IEC 60695-2-11 |
Nėra |
Šviesos skirstytuvas |
Kita |
Įmontuotos lemputės energijos efektyvumo klasė |
Kita |
Efektyvumo klasė energijos tiekiamos keičiamai lemputei |
A |
Aukščiausios energinio efektyvumo klasės keičiama lemputė |
A |
Keičiamos lempos žemiausia energijos efektyvumo klasė |
A |
Reguliuojama spalvų temperatūra |
Ne |
Reguliuojamas šviesos srautas |
Ne |
Reguliuojamas spindulio kampas |
Ne |
Gyvenamojo namo paviršiaus apsauga |
Kita |
Aprašymas
Square recessed LED luminaire with microprismatic cover PW. Version M73 (600 mm x 600mm). Optionally, the luminaire can be equipped with an emergency light system for ceiling recessing with an emergency light operation time of 3 hours. In emergency light operation, the luminaire luminous flux is 575 lm. Generation of an enhanced depth effect in the room. For system ceilings with exposed grids. The luminaire body is flush with the ceiling system on the room side. The Sky frame, optionally available as an accessory, creates a room-atmospheric depth effect in the classic, flat modular ceiling; the 3-dimensional contour of a skylight is reproduced. The optical system consists of a highly efficient PMMA cover with microprisms. The microstructured PMMA prism surface of the optical system has a glare-reducing effect, is non-yellowing and does not cloud. With symmetric limited wide light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/2 for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission. Individual design of the light emission surface (e.g. with printing) and other special solutions are possible on request. Luminaire luminous flux and light color fixed. Luminaire luminous flux 4200 lm, connected load 31 W, maximum luminous efficiency of luminaire 135 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of extruded aluminium profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 596 mm, 596 mm, 22 mm. The narrow side profile is flush with the trunking. The luminaire frame is profiled in a 3-dimensional way to generate a depth effect on the ceiling. Luminaire can be covered with insulatin material at ta 25°C, ta35 °C without insulation materila can be also be used. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, Protection rating on room side: IP40, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 3,4 kg. Polarity-protected rapid connection with mains through-wiring up to Ø 2.5 mm2. Connection of the ballast unit to the luminaire (Plug ‘N Play). The luminaire’s packaging concept facilitates separate removal of the control gear unit for pre-assembly, leaving the remaining luminaire components protected until final assembly. With external operating device, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Control gear unit is open-circuit proof and protected against faulty connection, short circuit, overload and overtemperature. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires with a harmonised appearance. The application variety of the product series is underlined by variants regarding luminous flux packages, light distribution curves and protection ratings. On request, the basic range can be expanded with project-specific luminaire features. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.