SINAMICS G120 CONTROL UNIT CU250S-2...

Item condition	New
Manufacture name	SINAMICS G120 CONTROL UNIT CU250S-2...
Brand	Siemens
Categories	Control gear
Country of origin	GB
Harmonized System Code	8504 9090 00
Width	73 mm
Height	199 mm
Depth	67 mm
With control element	-
Number of digital inputs	15
Number of digital outputs	3
Number of analogue inputs	2
Number of analogue outputs	2
Supporting protocol for LON	No
Number of HW-interfaces industrial Ethernet	2
Number of HW-interfaces RS-232	1
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	4
Number of HW-interfaces USB	1
Number of HW-interfaces parallel	0
Number of HW-interfaces other	UN
With optical interface	No
Supporting protocol for TCP/IP	Yes
Supporting protocol for ASI	No
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for KNX	No
Supporting protocol for Modbus	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for other bus systems	No
With PC connection	Yes
Supporting protocol for SERCOS	No
Supporting protocol for INTERBUS-Safety	No
Mains voltage	UN V
4-quadrant operation possible	-
Number of interfaces PROFINET	2
Integrated breaking resistance	-
Application in industrial area permitted	-
Application in domestic- and commercial area permitted	-
Max. output frequency	UN Hz
Max. output at linear load at rated output voltage	UN kW
Max. output at quadratic load at rated output voltage	UN kW
Relative symmetric net voltage tolerance	UN %
Relative symmetric net frequency tolerance	UN %
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for EtherNet/IP	Yes
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFIsafe	Yes
Supporting protocol for SafetyBUS p	No
Max. output voltage	UN V
Nominal output current I2N	UN A
Supporting protocol for BACnet	No
Degree of protection (NEMA)	1

Packing level 1

4042948664117

SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRIERT PROFINET SUPPORT OF VECTOR CONTROL, EASY POSITIONING EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI, 2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA EXTENDED SAFETY LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL PROTECTION IP20 USB- AND SD/MMC-INTERFACE Control Unit SINAMICS CU250S-2 PN Control Unit for high performance applications in general machinery construction for modular SINAMICS G120 inverters. The CU250S-2 Control Unit is part of the modular SINAMICS G120 inverter (comprising power unit, control unit, operator panel). The control unit is suitable for single-motor drives with high requirements placed on the speed control. Extended safety functions as well as a large number of I/O allow complex applications to be addressed. For vector control, two encoders (position and speed) can be connected. This extension allows the device to be used for hoist/swivel/gantry and slewing applications. The CU250S-2 Control Unit controls and monitors the power unit (Power Module) and the connected motors; several control modes can be selected. It facilitates communication to a local or central control system as well as to the monitoring equipment – and is used to connect all process-related auxiliary equipment and external components (sensors, valves, contactors, etc.) The comprehensive I/O interfaces, the fieldbus interfaces and the additional software functions optimally support its use in general machinery construction. The CU250S-2 is equipped as standard with the integrated safety functions Safe Torque Off (STO), Safe Stop 1 (SS1) and Safe Brake Control (SBC). Further, the integrated safety functions – Safely Limited Speed (SLS), Safe Speed Monitor (SSM) and Safe Direction (SDI) – can be enabled with the safety license. The following integrated communication versions are available: CU250S-2 with USS and Modbus RTU protocols, CU250S-2 DP PROFIBUS and CU250S-2 PN PROFINET, EtherNet/IP and CU250S-2 CANopen. The Control Unit can be operated with the following SINAMICS power units: PM240-2 (0.55 kW to 132 kW) and PM240 (up to 250 kW). SINAMICS - simply my drive!