2-channel timer with display and Bluetooth

Item condition	New
Manufacture name	2-channel timer with display and Bluetooth
Brand	ELTAKO
Categories	Relays
Country of origin	CN
Harmonized System Code	8536 5080 00
Mounting method	DIN rail
Width	18 mm
Height	82 mm
Depth	58 mm
Number of contacts	2
Number of memory locations	60
Astro program	Yes
Number of channels	2
Radio-controlled	No
Weekly program	Yes
Annual program	No
Contact type	Normally open contact (NO)
GPS (global positioning system)	No
Width in number of modular spacings	1
60 min program	No
24 h program	Yes
Holiday program	No
Random program	Yes
Impulse program	No
Cycle program	No
Mains synchronous	No
Quartz controlled	Yes
Automatic switching summer-/winter time	Yes
Suitable for manual operation	Yes
Switching preselection	No
Voltage type of supply voltage	AC/DC
Potential free switch contact	Yes
External programming	Yes
Radio-controlled (DCF77)	No
Supply voltage	8-230 V
Hour meter	No
Frequency supply voltage	50 Hz
Autonomy in hours	480
Shortest switching time channel 1	1 min
Shortest switching time channel 2	1 min
Nominal switching current at 250 V AC	16 A
Text guidance in display	Yes
Degree of protection (IP)	IP20
External pushbutton input	Yes
With memory card	-
Max. switching power LED	200 W

Packing level 1	4010312603277, 4010312603277
Packing level 2	4010312603277
Packing level 3	4010312603277

2-channel timer with display, Bluetooth and Eltako Connect app. Channel 1 with 1 potential-free NO contact 16A/250V AC and DX. Channel 2 with 1 potential-free OptoMOS semiconductor output 50mA/12..230V UC e.g. to control an electronic relay (ER) or a group impulse switch (EGS). With display lighting and astro function. Standby loss only 0.1-0.3 watts. Supply and control voltage for central control 12 to 230V UC. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. With the patented Eltako duplex technology (DX), the normally potential-free contact 1 can still switch at zero crossing when ­switching 230V/50Hz AC voltage and thus drastically reduce wear. To achieve this, simply connect the N ­conductor to the terminal (N) and L to 1(L). This results in an additional standby consumption of only 0.1 watt. Up to 60 timer memory locations are freely assigned to the channels. With date and automatic summer/winter time changeover. Ca. 7 days power reserve without battery. Each memory location can be assigned with the astro function (automatic switching after sunrise or sundown), the switch on/off time or a pulsed switching time (which triggers an impulse of 2 seconds). The astro switch on/off time can be changed up to ± 2 hours. A time lag of up to ± 2 hours influenced by the solstices can be entered additionally. With control input (+A1) for central control ON or OFF with priority. The timer is set either via Bluetooth with the app or with the MODE and SET buttons, a button lock is possible. The display lighting is switched on by pressing MODE or SET for the first time. 20 seconds after you last press MODE or SET, the program returns automatically to normal display and the display illumination goes off. Connect the timer to the app: Press SET, the display shows BLE (Bluetooth) and the ID of the timer. The connection to the app can now be established (delivery state PIN 123123). Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears in the display. The MODE and SET buttons are now locked. After 20 minutes without interacting with the timer, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the app under the Device PIN entry. Bluetooth reset (delete any changed PIN): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes in the display. Now press SET for 2 seconds, BLE appears in the display. If you confirm with SET, the bLE reset is carried out, the PIN is deleted and the delivery status is restored. Set the timer with the MODE and SET buttons: Set language: Every time the power supply is applied, press SET within 10 seconds to set the language and press MODE to confirm. D = German, GB = English, F = French, IT = ­Italian and ES = Spanish. The normal display then appears: weekday, time, day and month. Rapid scroll: In the following settings, the numerals scroll rapidly when you press and hold down Enter. Release then press and hold down to change the scroll direction. Set clock: Press MODE then at PRG (program) press SET to search for the CLK function. Press MODE to set. In H, press SET to select the hour and press MODE to confirm. In M proceed in the same way to set the minute. Set date: Press MODE then at PRG press SET to search for the DAT function. Press MODE to select. At Y, press SET to select the year and press MODE to confirm. Proceed in the same way at M to set the month and at D to set the day. The last setting in the sequence is MO (weekday) blinking. Press SET to set it and press MODE to confirm. Further settings like geographic position for astro function, manual switching ON or OFF, summer/winter time changeover, central control ON or OFF, random mode, keylock and entering of timer programs are described in the operating instructions.