Omron Programmable logic controllers - Puslapis 15

Omron

CS1W0283E Terminal conversion block

CS1W0052B PLC component

CS1W0293B Terminal conversion block

CS1W0282G Terminal conversion block

I/O terminal block, MIL20 socket, M3 captive screws, 16 x IN/OUT, NPN/PNP selectable

Input terminal block, MIL40 socket, M3 captive screws, 32 x IN with bleed resistors, for Omron PLC units with FCN connectors

Input terminal block, MIL20 socket, M3 captive screws, 16 x IN, 3-wire connection

Input terminal block, MIL20 socket, M3.5 screws, 16 x IN, NPN, LED indication

DIN-rail mounting terminal block, MIL34 socket, screw clamp, 34 points, general-purpose,philips screw

DIN-rail mounting terminal block, MIL40 socket, M3 screws, 32x OUT + power, for Mitsubishi PLC units with FCN40 connectors

DIN-rail mounting terminal block, MIL40 socket, M3 screws, 32x IN + power, for Mitsubishi PLC units with FCN40 connectors

DIN-rail mounting terminal block, MIL20 socket, push-in clamp, 16 I/O points (3-wire connection), for Omron input units

Isolated analog output unit, 4 x outputs 4 to 20mA, 1 to 5 V, resolution 1:4,000

Isolated thermocouple input unit, 8 x inputs type K, J, L, R, S, T, B, resolution 0.1°C

Automation, Control Systems, CV, CV500-CN132

I/O connecting cable, 1m, for use with CV500-IC201/II201 or CS1W-IC102/II102

Automation, Control Systems, CV, CV500-CN222

Isolated analog output unit, 4 x inputs -10 to 10 V, -1 to 1 V at resolution 1:16000, 0 to 10 V, 0 to 1 V, -5 to +5 V at resolution 1:8000, 0 to 5 V at resolution 1:4000

Automation, Control Systems, CV, CV500-CN312

Automation, Control Systems, CV, CV500-CN232

Automation, Control Systems, CV, CV500-CN322

Automation, Control Systems, CV, CV500-CN332

Isolated pulse input unit, 4 x inputs (voltage input, no-voltage semiconductor input, contact input), 20 kHz input frequency (20 Hz for contact input)

Automation, Control Systems, CV, CV500-CN522

Automation, Control Systems, CV, CV500-CN432

I/O connecting cable, 50m, for use with CV500-IC201/II201 or CS1W-IC102/II102

Automation, Control Systems, CV, CV500-CN612

Position input unit, SSI absolute encoder 2 channels, 9 to 31 bit, Gray/Binary/Taunenbaum/Raw coding, 4x digital inputs, 4x digital outputs NPN and PNP

3 m cable between terminal strip XW2B-40J6-2B and CS1W / C200HW-NC213 / 413 at W series servo driver

DIN-rail mounting terminal block, MIL20 socket, push-in clamp, 16 I/O points (3-wire connection), for Omron output units

DIN-rail mounting terminal block, MIL40 socket, push-in clamp, 32 I/O points (3-wire connection), for Omron input units with MIL40 connectors

Din track mounting terminal, MIL34 socket, push-in spring, 34 points, general-purpose

DIN-rail mounting terminal, MIL34 socket, 32 x OUT + power, for Omron PLC

DIN-rail mounting terminal block, MIL40 socket, push-in clamp, 32x IN + power, for Mitsubishi PLC units with FCN40 connectors

DIN-rail mounting terminal block, MIL40 socket, push-in clamp, 32x OUT + power, for Mitsubishi PLC units with FCN40 connectors

General-purpose I/O terminal block, MIL20 socket, screw clamp, 20 points

General-purpose I/O terminal block, MIL40 socket, screw clamp, 40 points

Horizontal screw mounting terminal block, MIL34 socket, push-in clamp, 34 points, general-purpose

General-purpose I/O terminal block, MIL20 socket, M3.5 screws, 20 points

I/O connection cable, unshielded, MIL40 to MIL40, 0.3 m

I/O connection cable, unshielded, FCN24 to MIL20, 0.5 m

I/O connection cable, unshielded, FCN40 to MIL40, 0.5 m

I/O connection cable, unshielded, MIL20 to fork terminals, 0.5 m

I/O connection cable, unshielded, MIL34 to MIL34, 0.5 m

I/O connection cable, unshielded, MIL20 to MIL20, 0.5 m

I/O connection cable, unshielded, MIL20 to open ends, 0.5 m

I/O connection cable, unshielded, MIL40 to 2 x MIL20, 0.75 m, cross-wired

I/O connection cable, unshielded, FCN24 to MIL20, 1 m

I/O connection cable, unshielded, MIL40 to MIL40, 0.5 m

I/O connection cable, unshielded, MIL40 to 2 x MIL20, 0.75 m

I/O connection cable, unshielded, FCN40 to 2 x MIL20, 1 m

I/O connection cable, unshielded, FCN24 to open ends, 1 m

I/O connection cable, unshielded, FCN40 to MIL40, 1 m

I/O connection cable, unshielded, FCN40 to open ends, 1 m

I/O connection cable, unshielded, FCN40 to 2 x MIL20, 1 m, cross-wired

I/O connection cable, unshielded, FCN56 to MIL60, 1 m

I/O connection cable, unshielded, MIL20 to fork terminals, 1 m

I/O connection cable, unshielded, MIL20 to MIL20, 1 m

I/O connection cable, unshielded, MIL40 to 2 x MIL20, 1 m, cross-wired

Omron Programuojami loginiai valdikliai - Puslapis 15