Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
Powerline sensor inputs, 8 channels, internal low voltage image 1
ELTAKO

Powerline sensor inputs, 8 channels, internal low voltage

Yra sandėlyje: Ne Pardavėjo atsargos: Ne Minimalus užsakymo kiekis: 1
Kaina (be PVM):
94,43 €
Ši kaina galioja iki 31.12.24
EAN: 4010312316719
MPN: 31800001
Pakuotė: 1

Technical Information

Prekės būklė Nauja
Gamintojo pavadinimas Powerline sensor inputs, 8 channels, internal low voltage
Prekės ženklas ELTAKO
Kategorijos Jutikliai
Kilmės šalis CN
Suderintos sistemos kodas 8526 9200 00
Montavimo metodas Apatinis sluoksnis (tinko)
Modelis Kita
Įvesčių skaičius 8
EIB / KNX magistralės sistema No
Magistralės sistemos radijo dažnis No
„Powernet“ magistralės sistema Yes
Kitos maršrutinės sistemos Nėra
LON magistralinė sistema No
KNX radijo magistralės sistema No

Pakavimo informacija

Pakavimo lygis 1 4010312316719, 4010312316719
Pakavimo lygis 2 4010312316719
Pakavimo lygis 3 4010312316719

Atsisiuntimai

Gilios nuorodos į produkto puslapį

Aprašymas

Powerline sensor input with 8 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at different places. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above them is a slide switch which functions as a configuration switch. Position 0: 2 adjacent inputs as direction pushbuttons for UP/DOWN or ON/OFF. Position 1: All sensor inputs function separately as NO contacts. Position 2: All sensor inputs function separately as pushbuttons. This setting always affects all 8 inputs. The setting can only be changed after a reset. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². The addresses of the 8 inputs can also be freely assigned if necessary using the PC software SIENNA-Professional. The socket strip located above this has 9 plug-in wires with wire end-sleeves. 8 control inputs with internal low voltage.