Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!

Pradžia
Įrengimas
Elektros skydai
REGplus IP20 C6Amodul 270°M

METZ CONNECT

REGplus IP20 C6Amodul 270°M

Name: REGplus IP20 C6Amodul 270°M
Brand: METZ CONNECT
Availability: PreOrder

Pardavėjo atsargos: Ne Minimalus užsakymo kiekis: 1

Sandėlyje esančios prekės kaina (be PVM):

Kaina pagal užklausą

Ši kaina galioja tol, kol baigsis atsargos

EAN: 4250184136552

MPN: 130B127003-E

Pakuotė: 1

Dėžė: 10

Technical Information

Prekės būklė	Nauja
Gamintojo pavadinimas	REGplus IP20 C6Amodul 270°M
Prekės ženklas	METZ CONNECT
Kategorijos	Elektros skydai
Kilmės šalis	DE
Suderintos sistemos kodas	8536 6990 00
Medžiaga	Metalas
Tvirtinimo tipas	DIN bėgis (viršutinis bėgis) 35 mm
DIN bėgių adapterio tipas	Tiesus

Pakavimo informacija

Pakavimo lygis 1	4250184136552
Pakavimo lygis 2	4250184136552

Aprašymas

Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations, equipped with C6, Amodul 270° RJ45 individual modulecable feed 45° from the bottom, plug direction 45° downwards, certified to GHMT Cat.6, A re-embedded PVPCat.6, A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certifiedcompliance with class E, A up to 500 MHz according to ISO/IEC 11801, DIN EN 50173-1tested: component up to 600 MHz, link up to 800 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy to install connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC), conductor assignment to T568A and T568B is directly printed on the stuffer cap, width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels, When mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal. A cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.integrated dust protection cover (also colored)