Technical Information
Prekės būklė |
Nauja |
Gamintojo pavadinimas |
DALI LED 4 channels dimmer 16A for DIN-EN 60715 TH35 rail mounting (DT6) |
Prekės ženklas |
ELTAKO
|
Kategorijos |
Jungikliai
|
Kilmės šalis |
BG |
Suderintos sistemos kodas |
8542 3190 00
|
Kompleksinio bloko išdėstymas |
Pagrindinis elementas |
Veikimo metodas |
Paspaudžiamas mygtukas |
Nominali įtampa nuo / iki |
12-48 V |
Tinka apsaugos laipsniui (IP) |
IP20 |
Įrenginio plotis |
17.5 mm |
Įrenginio aukštis |
98 mm |
Įrenginio gylis |
56 mm |
Maks. perjungimo maitinimo šviesos diodas |
768 W |
Pakavimo informacija
Pakavimo lygis 1 |
4010312321577, 4010312321577 |
Kiti techniniai duomenys
Montavimo metodas |
DRA |
Spalva |
Pilkas |
Be halogeno |
Yes |
Jungties tipas |
Kištuko gnybtas |
Paviršiaus apdorojimas |
Neapdorotas |
Medžiagos kokybė |
Termoplastikas |
Medžiaga |
Plastikinis |
Šviesos vertės atmintis |
Yes |
Pastotės įvestis |
No |
Nuoseklioji užtamsinimo sistema |
No |
Naudotinas su judesio davikliu |
No |
Naudotinas su perdavimo mygtuku |
No |
Naudotinas su infraraudonųjų spindulių mygtuku |
No |
Naudotinas su buvimo rodmeniu |
No |
Naudotinas su mygtuku |
No |
Naudotinas su laiko jungikliu / laikmačiu |
No |
Kontrolinė įtampa nuo / iki |
9.5-22.5 V |
Permatomas |
No |
Paviršiaus tipas |
Kilimėlis |
Šerdies kryžminė sekcija nuo / iki |
1.5-2.5 mm² |
Galimas IFTTT palaikymas |
No |
Neryškus fazės nutrūkimas |
No |
Neryškus fazės dalijimas |
No |
App valdymas per Bluetooth |
No |
Vardinės galios apkrova |
768 W |
Suderinamas su Apple HomeKit |
No |
Suderinamas su Google Assistant |
No |
Suderinamas su Amazon Alexa |
No |
Atsisiuntimai
Aprašymas
4 channels DALI LED dimmer for DIN-EN 60715 TH35 rail mounting. 98x17,5x56mm. Protection class IP20. Only 0.12 watt standby loss. Designed to control constant voltage LED modules (CV) at operating voltages of 12V to 48V, operating mode DT6: separate control of channels via 4 DALI addresses. Operating mode Colour&Dim: activated by 2 DALI addresses, one to adjust brightness and one to set the colour. SwitchDim2: operation via 2 pushbutton inputs permits control of brightness and colour without DALI. Dimming range 0.1%-100%. Switchable PWM frequency (122Hz/244Hz/488Hz/976Hz). Power supply from 12V to 48V DC (depending on operating voltage of LED modules). Connected current 16A. The maximum connected current can be distributed to any channel. High efficiency. Configuration via DALI Cockpit PC software and DALI USB interface. Operating modes: The device has several operating modes: DT6 (as-delivered state): In this operating mode each channel is controlled by a separate DALI address (Device Type 6). Alternatively, operation can also take place by two pushbutton inputs (SwitchDim2): SwD1: brightness. Press pushbutton briefly: On/Off. Press pushbutton long: Dim. SwD2: Scene switch (press pushbutton briefly). Colour&Dim: This operating mode is used to control RGB luminaries. Control is by means of 2 DALI addresses. One address affects brightness and the other affects channel distribution (e.g.: colour). Colour&Dim mode is used to adjust colour temperature without affecting brightness and vice versa. Adjustment is by means of DALI standard commands such as Dim Up/Down. This permits all customary controls and gateways (e.g. KNX). This control option is an alternative to DT8-RGBWAF mode. Operable via DALI or SwitchDim2: DALI address 1, SwD1: brightness. DALI address 2, SwD2: Colour.