LED dimmer switch, Power MOSFET up to 4A

Состояние товара	Новый
Название производителя	LED dimmer switch, Power MOSFET up to 4A
Бренд	ELTAKO
Категории	Выключатели
Страна происхождения	CN
Код гармонизированной системы	8536 5080 00
Устройство сборки	Другое
Метод работы	Сенсорная кнопка управления
Тип нагрузки	Другое
Номинальное напряжение	8-230 V
Ширина устройства	45 mm
Высота устройства	45 mm
Глубина устройства	18 mm

Уровень упаковки 1	4010312109502, 4010312109502
Уровень упаковки 2	4010312109502
Уровень упаковки 3	4010312109502

Способ крепления	Монтаж заподлицо (штукатурка)
Цвет	Синий
Без галогена	Yes
Тип соединения	Винтовая клемма
Защита поверхности	Другое
Качество материала	Термопластик
Материал	Пластик
Тип крепления	Крепление с винтом
Память светового значения	Yes
Вход подстанции	No
Серийный диммер	No
Применяется с датчиком движения	No
Применимо с кнопкой передачи	No
Применимо с инфракрасной кнопкой	No
Применяется с индикатором присутствия	No
Применимо с кнопкой	Yes
Применимо с таймером/таймером	No
Управляющее напряжение	8-230 V
Прозрачный	No
Отделка поверхности	Матовый
Сечение жилы	4 mm²
Доступна поддержка IFTTT	No
Отсечка фазы диммирования	No
Отключение фазы диммирования	No
Мин. глубина встроенной монтажной коробки	18 mm
Управление приложением через Bluetooth	No
Совместимость с Apple HomeKit	No
Совместимость с Google Ассистент	No
Совместимость с Amazon Alexa	No

Power MOSFET for LED lamps 12-36V DC up to 4A, pulse width modulation PWM. Stand-by loss 0.1 Watt only. With adjustable minimum brightness and dimming speed. With switching operation for children's rooms and snooze function. For installation. 45mm long, 45mm wide, 18mm deep. Dimmer switch for R- and LED loads up to 4A depending on ventilation conditions. Zero passage switching with soft start and soft OFF to protect lamps. Supply voltage input 12 to 36V DC, depending on the connected LED illumination. A pulse resistant switching power supply unit is necessary. Universal control voltage 8..230V UC, electrically isolated from the supply voltage. Either direction pushbuttons can be connected to arrow up/arrow down or these terminals will be bridged and a pushbutton will be connected as an universal pushbutton. With universal pushbutton: short commands switch on/off, permanent control changes the brightness to the maximum. An interruption of the control changes the dimming direction. With direction pushbutton: switching and dimming on with arrow up, turning and dimming off with arrow down. A dual pulse with arrow up effects dimming on up to the maximum brightness with the set dimming speed (dimspeed). The set brightness level will be stored when turning off (Memory). In case of power failure the switching position and the brightness level will be stored and will be switched on when supply voltage recurs. Automatic electronic overload protection and overtemperature switch off. The LED indicates an activation by a short flickering. With the top rotary switch %lamp the minimum brightness level (completely dimmed down) can be adjusted. With the lower dim speed rotary switch, the dimming speed can be set. At the same time, soft-on and soft-off is changed. With switching operation for children's rooms (universal or direction pushbutton arrow up): if the light is switched on by holding down the pushbutton it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is pressed without modifying the latest stored brightness level. Snooze function (universal or direction pushbutton arrow down): with a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function.