Legrand Installation - Puslapis 120

End cap Viking 3 - for screw terminal blocks 1 entry/1 outlet - pitch 12 and 15

Legrand

Screening continuity bracket - screw - 1 entry/1 outlet - pitch 5,6,8,10

Bridging combs Viking 3 - 3 levels- screw - 12 blocks / pitch 5 - blue

Shielding bar Viking 3 - screw/spring - L. 1m - 10x3 mm

Shielding clamps Viking 3 - screw/spring - for cable Ø10 to 20 mm

Shielding clamps Viking 3 - screw/spring - for cable Ø4 to 13.5 mm

Bar Viking 3 - for screw terminal block - equipotential - 12 blocks / pitch 10

Joining rods Viking 3 - for handle and mini lever - for 3 blocks

Joining rods Viking 3 - for handle and mini lever - for 2 blocks

Blade lever Viking 3 - with handle lever for fuse cartridge 5x20

Copper bar - flat rigid - section 63 x 5 mm - 700 to 800 A - L. 1750 mm

Copper bar - flat rigid - section 50 x 5 mm - 630 to 700 A - L. 1750 mm

Copper bar - flexible - section 50 x 5 mm - 630 to 800 A - L. 2 m

Isolating universal support - 1 bar/pole - up to 280 A -for 15/18/25 x 4 mm bars

Copper bar - flat rigid - section 18 x 4 mm - 200 to 245 A - L. 990 mm

Claw - for symmetrical rail EN 60715 - width 35 mm - for M4 and M6 screws

Copper bar with tapped holes - 15 x 4 mm - max. 200 A - L. 990 mm

Copper bar - flat rigid - section 25 x 4 mm - 250 to 280 A - L. 990 mm

Copper bar - flexible - section 32 x 5 mm - 400 to 630 A - L. 2 m

Power distribution block - stepped for lugs - 250 A - 4 bars 25 x 4 mm

Copper bar - flexible - section 24 x 4 mm - 250 to 400 A - L. 2 m

Isolating universal support - 1 bar/pole - up to 280 A - for 15x4 - 18x4 mm bars

Copper bar - flat rigid - section 32 x 5 mm - 400 to 450 A - L. 1750 mm

Copper bar - flexible - section 13 x 3 mm - 160 to 200 A - L. 2 m

Copper bar - flat rigid - section 25 x 5 mm - 270 to 330 A - L. 1750 mm

Rail to be cut - symmetrical - depth 15 mm - th. 1.5 mm - L. 2 m

Power distribution block - stepped for lugs - 125 A - 4 bars 15 x 4 mm

Rail to be cut - EN 60715 - asymmetrical - L. 2 m

Power distribution block - stepped for lugs - 160 A - 4 bars 18 x 4 mm

Connector with 3 outgoing terminals - 250 A

Connector with 3 outgoing terminals - 200 A

Rail to be cut - EN 60715 - symmetrical - depth 7.5 mm - L. 2 m

Isolating universal support - 1 bar/pole - up to 280 A - for 12x2 - 1x4 mm bars

ALTIS 4000A BAR SET SUPPORT

Isolating universal support - 1 bar/pole - up to 280 A - for 12x2 - 12x4 mm bars

ALTIS 800A BAR SET SUPPORT

ALTIS 1000A BAR SET SUPPORT

Copper bar with tapped holes - 12 x 4 mm - max. 160 A - L. 990 mm

Power distribution block - extra-flat for lugs - 250 A

Power distribution block - stepped for lugs - 125 A - 4 bars 12 x 4 mm

COUPLING KIT SUPPORTS 725/975

ALU BAR STD SUPPORT DEPTH 725

ALU BAR CS SUPPORT DEPTH 725

ALU BAR CS SUPPORT DEPTH.975

ALU BAR STD SUPPORT DEPTH975

CONNECTION PLATE 2 BAR/POLE

Connector - for non perforated bars - 6 to 16 mm²

Connector - for non perforated bars - 10 to 35 mm²

Connector - for bars with tapped holes - 1 or 2 conductor 1.5 to 10 mm²

Connector - for non perforated bars - 1.5 to 4 mm²

ADDITIONAL SUPPORT DEPTH 725MM

Additional support for XL³ - in addition to 373 24 support

INSULATING SUPPORT DMX3 1600-2500 WITHDRAW.

Legrand Įrengimas - Puslapis 120