Powerline repeater

Цена на складе (без НДС):

83,29 €

Цена действительна до 2024-12-31

Цена за м: 83,29 €

EAN: 4010312324103

MPN: 31000030

Наш склад: Нет Запасы поставщика: Нет

За упаковку: 1 За коробку: 1 За поддон: N/A

Технические данные

Состояние товара	Новый
Название производителя	Powerline repeater
Бренд	ELTAKO
Категории	Датчики
Страна происхождения	CN
Код гармонизированной системы	8526 9200 00
Номинальное напряжение	230 V
Способ крепления	Монтаж заподлицо (штукатурка)
Шинная система KNX	No
Шинная система радио частая	No
Шинная система Powernet	Yes
Другие автобусные системы	Нет
Шинная система LON	No
Степень защиты (IP)	IP20
Шинная система Радио KNX	No

Сведения об упаковке

Уровень упаковки 1	4010312324103, 4010312324103
Уровень упаковки 2	4010312324103
Уровень упаковки 3	4010312324103

Downloads

Прямая ссылка на страницу продукта

Описание

Powerline repeater. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Standby loss only 0,5 watt. The repeater supports greater ranges. With cable lengths of >300m the repeater is normally located in a distributor between the sensor and the actuator. The repeater repeats commands from sensors with the same address g, e. Feedback messages from actuators are not repeated. Two rotary switches are located on the front to assign addresses: The left-hand rotary switch determines the group address g with 16 alphanumeric digits from A to P. The right-hand rotary switch determines the element address e with 16 numerical values. Above it is a slide switch which is a configuration switch with positions 0, 1 and 2. Position 0: Central commands are repeated irrespective of the repeater’s e address. With address g, e=0, only central commands are repeated. Position 1: With address g, e=0 at the repeater, all commands of group g are repeated. Position 2: Unassigned. All entries and configurations can also be accessed via the mains using the Sienna Professional PC software. Addresses can be changed live or without voltage. On the left of the rotary switches is a red LED to display all activities. Next to that is the Reset button and to the right of that is Service Pin (P). The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm².