Mobile single-phase energy meter personal protection intermediate switch PRCD, with MID
Sandėlyje esančios prekės kaina (be PVM):
165,77 €
Ši kaina galioja iki 2024-12-31
Kaina už m:
165,77 €
EAN: 4010312501856
MPN: 28016113
Mūsų sandėlis:
Ne
Pardavėjo atsargos:
Ne
Už pakuotę:
1
Už dėžę:
1
Už padėklą:
N/A
Techniniai duomenys
| Prekės būklė | Nauja |
| Prekės ženklas | ELTAKO |
| Kategorijos |
Elektros skaitikliai |
| Kilmės šalis | CN |
| Suderintos sistemos kodas | 9028 3011 00 |
| Plotis | 110 mm |
| Aukštis | 70 mm |
| Gylis | 35 mm |
| Dažnio diapazonas | 50 Hz |
| Maks. srovė (Imax) | 16 A |
| Saugos laipsnis (IP) | IP54 |
| Impulsų dažnis | 2000 Imp/kWh (kvarh) |
| Poliškumas | Viena fazė |
| Nominali įtampa (Un) N-L | 230 V |
| Nominali srovė (In) | 5 A |
Pakavimo informacija
| Pakavimo lygis 1 | 4010312501856, 4010312501856 |
Downloads
Kiti techniniai duomenys
| Modelis | Tiesioginis matavimas |
| Tinka | Pirkti |
| Rodmens tipas | Skaitmeninis |
| Bendras skaičius (skaitiklis) | 7 |
| Matuoklio tipas | Elektroninis |
| Sąsajos tipas | Kita |
| Kilovatvalandžių skaitiklio energijos tipo versija | Efektinė galia |
| Kilovatvalandžių skaitiklio tarifinis modelis | Vieno dažnio |
| Išleidimo mechanizmas | Yes |
| Kalibruotas | Yes |
| Patvirtinimas | Matavimo priemonių direktyva |
| Impulsinė išvestis | Optika |
| Tikslumo klasė | B |
| Apkrovos profilio matavimas | - |
| EEC40 parašas | - |
| Su blokavimo kodu | No |
Aprašymas
Mobile single-phase energy meter with CEE plug and CEE coupling. With additional residual current circuit breaker PRCD 30mA. Suitable for indoor and outdoor use. Maximum current 16A. Standby loss 0,4 watt only. Housing dimensions 110x70x35mm, connection cable 1.5m (including plug and coupling). Accuracy class B (1%). This mobile single-phase energy meter measures active energy by means of the current between input and output. The internal power consumption of 0.4 watt active power is neither metered nor indicated. Every 30 seconds, the display switches for 5 seconds from the accumulated active energy in kWh to the momentary consumption in watts. The start current is 20mA. The display can only be read when the power supply is on. However, the consumption is saved to a non-volatile memory and is displayed immediately after a power failure. The digital display has 7 digits. Two decimal places are indicated up to 99999.99kWh. Above 100000.0kWh there is only one decimal place. Power consumption is shown by a LED flashing at a rate of 2000 times per kWh. The personal protection intermediate switch PRCD detects fault currents that occur, for example, when a faulty electrical device is touched, and interrupts the current so quickly that life-threatening accidents can be prevented. It also has an undervoltage release that switches off in the event of a mains voltage failure. With function indication and test button.